""there is no authentication setup avalable for SMTP" sound like you have auth proxy enabled for all protocols, and you need to authenticate first before being allowed outbound on port 25. The FWSM doe not support authentication on port 25 so you must authenticate first on 80, 23, or 21 check out your aaa authentication commands to make sure port 25 is not include
_____ From: [email protected] [mailto:[email protected]] On Behalf Of karuna durai Sent: Wednesday, September 02, 2009 12:33 AM To: [email protected] Subject: [OSL | CCIE_Security] SMTP mail issue with FWSM Hi We had recently installed FWSM in the network and only one VLAN moved to Firewall zone where all the Servers are in place. Everything works fine expect the outgoing email for couple of users... The mail server reachable from outside, mails are going when you connect in internet. Its POP3 and SMTP setup. This issue raised only after FWSM in place. When you try to send a message getting an error saying that "there is no authentication setup avalable for SMTP. I had disabled the inspect for SMTP also.... After we disable in the Outlook SMTP server " My server requires authentication" It works fine... But the same setup was working fine with out FWSM... Any Idea..? Thanks in Advance
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
