Glenn,
By only creating the NAT pool it will not do PAT on the last address. Do the solution configuration and you will see an additional log message when you do the second pool with the singular address. Regards, Tyson Scott - CCIE #13513 R&S and Security Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Cell: +1.248.504.7309 Fax: +1.810.454.0130 Mailto: <mailto:[email protected]> [email protected] Join our free online support and peer group communities: <http://www.IPexpert.com/communities> http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video On Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: gbibit [mailto:[email protected]] Sent: Monday, October 05, 2009 3:45 PM To: [email protected]; Tyson Scott Subject: Lab 11 Section 1.3/1.4 Hi, First task is to use the NAT pool and use PAT if NAT pool is exhausted. Section 1.3 NAT pool 10.2.2.101-150 Solution guide shows: global (outside) 1 10.2.2.101-10.2.2.149 global (outside) 1 10.2.2.150 nat (inside) 1 0 0 My solution is: global (outside) 1 10.2.2.101-10.2.2.150 global (outside) 1 interface nat (inside) 1 0 0 Section 1.4 is similar. Is my solution acceptable? Thanks, /glenn
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
