H Tyson I too was in the same lines but the following surprised me and hence I am preparing for PVLANs :-(
Catalyst Platform PVLAN Supported Minimum Software Version Isolated VLAN PVLAN Edge (Protected Port) Community VLAN Catalyst 6500/6000 - Hybrid mode (CatOS on Supervisor and Cisco IOS® on MSFC)<http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper09186a00800c8441.html> 5.4(1) on Supervisor and 12.0(7)XE1 on MSFC Yes Not Supported Yes Catalyst 6500/6000 - Native mode (Cisco IOS® System software on both Supervisor and MSFC)<http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/prod_white_paper09186a00800c8441.html> 12.1(8a)EX, 12.1(11b)E1 and later. Yes Not Supported Yes Catalyst 5500/5000 Not Supported Not Supported Not Supported Not Supported Catalyst 4500/4000 - CatOS<http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/8.1/configuration/guide/vlans.html#wp1028273> 6.2(1) Yes Not Supported Yes Catalyst 4500/4000 - Cisco IOS<http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sg/configuration/guide/pvlans.html> 12.1(8a)EW Yes Not Supported Yes. 12.2(20)EW onwards. Catalyst 3550<http://www.cisco.com/en/US/docs/switches/lan/catalyst3550/software/release/12.2_25_se/configuration/guide/swtrafc.html> Not Supported Not Supported Yes. 12.1(4)EA1 onwards. Not Supported Catalyst 2950<http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea2/configuration/guide/swtrafc.html> Not Supported Not Supported Yes. 12.0(5.2)WC1, 12.1(4)EA1 and later. Not Supported Catalyst 2900XL/3500XL<http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_wc5/swg/swports.html> Not Supported Not Supported Yes.12.0(5)XU (on 8MB switches only) onwards. Not Supported Catalyst 2948G-L3 / 4908G-L3 Not Supported Not Supported Not Supported Not Supported Catalyst 1900 Not Supported Not Supported Not Supported Not Supported Catalyst 8500 Not Supported Not Supported Not Supported Not Supported Catalyst 3560<http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_20_se/configuration/guide/swpvlan.html> 12.2(20)SE - EMI Yes Yes. 12.1(19)EA1 onwards. Yes Catalyst 3750<http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_see/configuration/guide/swpvlan.html> 12.2(20)SE - EMI Yes Yes. 12.1(11)AX onwards. Yes Catalyst 3750 Metro<http://www.cisco.com/en/US/docs/switches/metro/catalyst3750m/software/release/12.2_25_seg_seg1/configuration/guide/swpvlan.html> 12.2(25)EY - EMI Yes Yes. 12.1(14)AX onwards. Yes Catalyst 2940<http://www.cisco.com/en/US/docs/switches/lan/catalyst2940/software/release/12.1_19_ea1/configuration/guide/swtrafc.html> Not Supported Not Supported Yes. 12.1(13)AY onwards. Not Supported Catalyst 2948G/2980G<http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/6.3and6.4/configuration/guide/vlans.html> 6.2 Yes Not Supported Yes Catalyst 2955<http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea2/configuration/guide/swtrafc.html> Not Supported Not Supported Yes. 12.1(6)EA2 onwards. Not Supported Catalyst 2970<http://www.cisco.com/en/US/docs/switches/lan/catalyst2970/software/release/12.2_25_se/configuration/guide/swtrafc.html> Not Supported Not Supported Yes. 12.1(11)AX onwards. Not Supported Catalyst 2960<http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_25_see/configuration/guide/swtrafc.html> Not Supported Not Supported Yes. 12.2(25)FX and later. Not Supported Catalyst Express 500 Not Supported Not Supported Not Supported Not Supported http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a0080094830.shtml With regards Kings On Thu, Jan 7, 2010 at 8:03 PM, Tyson Scott <[email protected]> wrote: > I thought you were asking about trunking between switches. Private VLAN > support on a trunk port is not supported on the 3560's > > > > Regards, > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP > > Technical Instructor - IPexpert, Inc. > > Mailto: [email protected] > > Telephone: +1.810.326.1444, ext. 208 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, > Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service > Provider) Certification Training with locations throughout the United > States, Europe and Australia. Be sure to check out our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > > *From:* Kingsley Charles [mailto:[email protected]] > *Sent:* Thursday, January 07, 2010 9:30 AM > *To:* Tyson Scott > *Cc:* [email protected] > > *Subject:* Re: [OSL | CCIE_Security] Private vlans > > > > Hi Tyson > > > > Please find the commands below. But I am not clear off where to use > "switchport > mode private-vlan trunk promiscuous" and > > "switchport mode private-vlan trunk secondary" > > > > Switch(config-if)# *switchport mode private-vlan trunk promiscuous* > > Switch(config-if)# *switchport private-vlan trunk native vlan 10* > > Switch(config-if)# *switchport private-vlan trunk allowed vlan 10, 3-4* > > Switch(config-if)# *switchport private-vlan mapping trunk 3 301, 302* > > > > > > > Switch(config-if)# *switchport mode private-vlan trunk secondary* > > Switch(config-if)# *switchport private-vlan trunk native vlan 10* > > Switch(config-if)# *switchport private-vlan trunk allowed vlan 10. 3-4* > > Switch(config-if)# *switchport private-vlan association trunk 3 301*** > > > > > http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/31sga/configuration/guide/pvlans.html#wp1158145 > > > > > > > > With regards > > Kings > > > > > > > > On Thu, Jan 7, 2010 at 7:45 PM, Kingsley Charles < > [email protected]> wrote: > > Hi Tyson > > > > I am not getting the commands but in the Cisco site, I saw that we have > separate switchport trunking commands for primary and secondary vlans. > > > > I am still searching > > > > > > With regards > > Kings > > On Thu, Jan 7, 2010 at 7:40 PM, Tyson Scott <[email protected]> wrote: > > It is just as normal trunking. You just need to configure the VLAN's on > each switch with the necessary perameters. > > > > Regards, > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP > > Technical Instructor - IPexpert, Inc. > > Mailto: [email protected] > > Telephone: +1.810.326.1444, ext. 208 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, > Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service > Provider) Certification Training with locations throughout the United > States, Europe and Australia. Be sure to check out our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Kingsley Charles > *Sent:* Thursday, January 07, 2010 8:58 AM > *To:* [email protected] > *Subject:* Re: [OSL | CCIE_Security] Private vlans > > > > > > I have an understanding on PVLAN trunking but with some confusions. > > > > Can some please explain how does PVLAN trunking works and necessary > commands to enable private primary and secondary vlan trunking. > > > > > > With regards > > Kingsley Charles > > > > > > > > On Thu, Jan 7, 2010 at 7:05 PM, Kingsley Charles < > [email protected]> wrote: > > Hi all > > > > I am trying to configure private PVLANS. Here vlan 4 is the private vlan > and 5,6 are secondary vlans. > > > > Please let me know, if the below configuration is fine: > > > > > > > > Switch(config)#vlan 4 > Switch(config-vlan)#private-vlan primary > > > Switch(config)#vlan 5 > Switch(config-vlan)#private-vlan community > > > Switch(config)#vlan 6 > Switch(config-vlan)#private-vlan isolated > > > Switch(config)#vlan 4 > Switch(config-vlan)#private-vlan association 5-6 > > > Switch(config)#int f0/1 > Switch(config-if)#switchport mode private-vlan promiscuous > Switch(config-if)#switchport private-vlan mapping 4 5-6 > > > Switch(config)#int f0/2 > Switch(config-if)#switchport mode private-vlan host > Switch(config-if)#switchport private-vlan host-association 4 5 > > > Switch(config)#int f0/3 > Switch(config-if)#switchport mode private-vlan host > Switch(config-if)#switchport private-vlan host-association 4 6 > > > Switch(config)#int vlan 4 > Switch(config-if)#private-vlan mapping 4 5-6 > > > > > > With regards > > Kingsley Charles > > > > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
