Thanks @all for clearing my question.

Am 20.01.2010 um 16:53 schrieb Tyson Scott:

> I will be honest I didn't even notice that DH G 14, 15, and 16 were added.  I 
> would say these are not applicable to the current exam as I don't think they 
> are using higher than 12.4(15)T Yet.  The command reference only lists IOS XE 
> as the introduction of these groups.  So sometime between 12.4(15)T and 
> 12.4(24)T it was introduced.
>  
> IOS EasyVPN Hardware Client only supports Group 2 currently.  the Software 
> Client as of version 5.0 actually prefers group 5.  But if you have to 
> support both you must choose group 2.
>  
> Johan was that one of our labs that said that because if so looks like I need 
> to update it?
>  
> Regards,
>  
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Technical Instructor - IPexpert, Inc.
> Mailto: [email protected]
> Telephone: +1.810.326.1444, ext. 208
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>  
> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, 
> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service 
> Provider) Certification Training with locations throughout the United States, 
> Europe and Australia. Be sure to check out our online communities at 
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>  
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Johan Bornman
> Sent: Wednesday, January 20, 2010 6:48 AM
> To: 'Kingsley Charles'; 'Bartlett Graham A'
> Cc: 'Simon Baumann'; [email protected]
> Subject: Re: [OSL | CCIE_Security] Question about DH group.
>  
> I lab’d a task last night where the requirement was the “strongest possible” 
> DH, in the solution 5 was used.
>  
> From: [email protected] 
> [mailto:[email protected]] On Behalf Of Kingsley 
> Charles
> Sent: 20 January 2010 13:43
> To: Bartlett Graham A
> Cc: Simon Baumann; [email protected]
> Subject: Re: [OSL | CCIE_Security] Question about DH group.
>  
> In the examination, which group do we need to use for EzVPN server?
>  
> Cisco recommends to use Group 2 for EzVPN server
>  
> With regards
> Kings
> 
> On Wed, Jan 20, 2010 at 5:01 PM, Bartlett Graham A 
> <[email protected]> wrote:
> Simon
> 
> Hopefully this will clear it up for you mate
> 
> http://www.ietf.org/rfc/rfc3526.txt
> 
> 
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Simon
> Baumann
> Sent: 20 January 2010 11:21
> To: [email protected]
> Subject: [OSL | CCIE_Security] Question about DH group.
> 
> 
> Hi,
> I noticed that IOS offers options 1,2,5 and (new to me) 14,15 and 16 for
> the DH group. Are the last groups new? Could I use it like the other
> groups or are there limitations (except for the other side not
> supporting it)? TIA.
> 
> Cheers
> Simon
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
> "This e-mail is intended for the recipient only.  If you are not the
> intended recipient you must not use, disclose, distribute, copy, print,
> or rely upon this e-mail. If an addressing or transmission error has
> misdirected this e-mail, please notify the author by replying to this e-mail."
> 
> "Recipients should note that all e-mail traffic on MOD systems is
> subject to monitoring and auditing."
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
>  

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to