Hi I think you have a typo in the URL.
Can you try this: https://10.0.0.1/admin/capture/cap1/pcap On Fri, Feb 5, 2010 at 10:55 AM, Alexander Neupokoev <[email protected]>wrote: > hi all. > i want capture traffic for wireshark analyze > > i create ACL : > > access-list captured extended permit ip host 10.0.0.20 any > > i create capture : > > capture cap1 access-list captured interface inside > > i try : show capture cap1 and see > 11: 12:08:14.105936 10.0.0.20.52233 > 77.41.0.49.12337: . ack 936394381 > win 32148 <nop,nop,timestamp 317608411 850244> > 12: 12:08:14.110010 10.0.0.20.51886 > 95.139.232.220.39157: . > 1681134273:1681135461(1188) ack 2995873649 win 32832 <nop,nop,timestamp > 317608411 170227> > 13: 12:08:14.110269 10.0.0.20.51886 > 95.139.232.220.39157: . > 1681135461:1681136649(1188) ack 2995873649 win 32832 <nop,nop,timestamp > 317608411 170227> > 14: 12:08:14.111062 10.0.0.20.50279 > 62.32.88.47.56371: . ack 3439370726 > win 18674 <nop,nop,timestamp 317608411 789650> > > thats ok. > I want recieve pcap file for analyze under wireshark. > > http server enable > > i go to the internet explorer or other browser , input link: > https://10.0.0.1/admin/capute/cap1/pcap and i recieve error 404 page not > found. > > Compiled on Tue 05-May-09 22:45 by builders > System image file is "disk0:/asa821-k8.bin" > Config file at boot was "startup-config" > > ciscoasa up 66 days 20 hours > > Hardware: ASA5520-K8, 512 MB RAM, CPU Pentium 4 Celeron 2000 MHz > > > help me please. > thanks > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
