I am just trying to wrap my head around this little detail. I couldn't find a
definitive answer in the docs
When applying a policy-map to an interface using the service-policy command,
the policy map is subjected to inbound and outbound packets depending on what
is configured for a specific class.
for inspect or set commands, the traffic is matched for inbound traffic
for police commands, the traffic is matched for inbound or outbound, depending
on what is configured
for shape or priority commands, the traffic is matched outbound
is this correct? I started to look at this a little deeper as lab 1.11 asked
you to configure tcp parameters for bgp. This was applied to the outside
interface, so I am assuming this only takes affect for packets from r4 -
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
