Toyos, Often when a configuration is being phased out it is removed from the documentation but still can be done via the cli- just look at the fixup protocol for instance. Now, I'm not saying that this is true for ipec pas-thru, I need to do the research on this feature in particular, but that's been my experience.
Regards, Brandon Carroll - CCIE #23837 Senior Technical Instructor - IPexpert Mailto: [email protected] Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. On Sat, Feb 20, 2010 at 11:14 PM, Toyos Yooyen <[email protected]> wrote: > Hello, > > Does ipsec-passthrough inspection no longer suppot in ASA 8.x code? > > And it does not appear in asa 8.0 configuration guide. but it's still show > in cli. > > Rack1ASA1(config-pmap-c)# inspect ? > > mpf-policy-map-class mode commands/options: > ctiqbe > dcerpc > dns > esmtp > ftp > h323 > http > icmp > ils > im > ipsec-pass-thru > mgcp > mmp > netbios > pptp > rsh > rtsp > sip > skinny > snmp > sqlnet > sunrpc > tftp > waas > xdmcp > Rack1ASA1(config-pmap-c)# inspect > > i'm using ASA 8.0(4) > > and I tested it doesn't work. > > > Regards, > Toyos > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
