Hi Kings Would be great if you can provide config of interfaces, and error that you get. I'll look into it.
Also good practice is to fix the trunks and encapsulation and dont rely on negotiation protocols. On Thu, Mar 4, 2010 at 2:13 PM, Kingsley Charles <[email protected] > wrote: > Hi Stojanco > > I tried that but I don't see that command in the running configuration and > also it doesn't disable the loopguard. > > > With regards > Kings > > On Thu, Mar 4, 2010 at 6:33 PM, Stojanco Cavdarov <[email protected]>wrote: > >> Hi >> >> Have you tried: "no spanning-tree loopguard default"? >> >> Works for me on Catalyst 4000. >> >> >> On Thu, Mar 4, 2010 at 1:52 PM, Kingsley Charles < >> [email protected]> wrote: >> >>> Hi all >>> >>> I have two switches connected to each other and that is trunk. The switch >>> brings the line down informing loop error. I am not able to find a command >>> to disable the loopgaurd. >>> >>> "spanning-tree loopguard default disable" >>> >>> >>> I only see "spanning-tree loopguard default". How do I disable it? >>> >>> >>> What might be the issue causing this looperror? Loop error happens when >>> the switch doesn't get the BPDUs right? But everything seems to fine on both >>> the switches. >>> >>> Is there anything that will stop sending the BPDUs on the other side? >>> portfast is disable on both the switches. >>> >>> With regards >>> Kings >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
