It seems, you are able to see the hub as the neighbor on R5 and R6. If you are using DMVPN phase 2, then please have "no ip split-horizon eigrp". Hope you have "no ip next-hop-self eigrp" too configured.
With regards Kings On Sun, Mar 14, 2010 at 4:11 PM, Michael Davis <[email protected]>wrote: > Hello everyone – I am working through Lab 11 and am having problems with > the DMVPN. The tunnels work fine, but then I cannot establish an eigrp > neighbor relationship with the hub. On R5 and R6 I get the following: > > R5#sh ip eigrp ne > > IP-EIGRP neighbors for process 100 > > H Address Interface Hold Uptime SRTT RTO Q > Seq > > (sec) (ms) Cnt > Num > > 0 10.99.99.1 Tu1 12 00:01:01 1 5000 2 0 > > But on the hub I get nothing! And no eigrp routes appear in my table > > I went back and configured it exactly as the DSG and still get the same > problem. Pings work fine across the tunnel. Any ideas? > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
