Hi all Please share your thoughts:
I have tried pushing various vlans as source into the remote vlan but never tried a dot1q traffic to remote vlan. Has anyone tried it? The above config pushea trunk traffic to remote vlan 999. With rspan and the following config, vlan 1 and 2 will be pushed into remote 999 and and on remote switch, vlan 1 and 2 will be tagged as vlan 999 not 1 and 2 on f1/0/2 sw1 monitor session 1 source vlan 1,2 monitor session 1 destination remote vlan 999 sw 2 monitor session 1 source vlan 999 monitor session 1 destination interface f1/0/2 encapsulation dot1q With following config, will the traffic be sent to the remote vlan as dot1q tagged traffic or individual vlans are sent? How will it be seen on the remote switch sw2? sw 1 interface f0/1 switch mode trunk monitor session 1 source f0/1 monitor session 1 destination remote vlan 999 sw 2 monitor session 1 source vlan 999 monitor session 1 destination interface f1/0/2 encapsulation dot1q With regards Kings
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
