Hi Keith, I see..Got it----Thank you very much
Regards Anantha Subramanian Natarajan On Sun, Apr 25, 2010 at 10:59 AM, Keith Barker <[email protected]> wrote: > Anantha- > > They may be referring to the fact that on the ASA in transparent mode, if > we > are doing NAT between a Call Manager, and a SoftPhone and the destination > address isn't local, it would need a static route on the ASA. > > From the 8.2 configuration guide: > > "If the real destination address is not directly-connected to the adaptive > security appliance, then you > also need to add a static route on the adaptive security appliance for the > real destination address that > points to the downstream router." > > That could be what they were referring to in their text. > > Best wishes, > > Keith > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > Anantha Subramanian Natarajan > Sent: Saturday, April 24, 2010 7:41 PM > To: Cisco certification; [email protected] > Subject: Static routes for certain inspection engines on transparent > firewall > > Hi All, > > I was going through the "Cisco ASA:All-in-One Firewall,IPS,Anti-X, and VPN > Adaptive Security Appliance" book,chapter 9(Transparent Firewalls),and > trying to understand the below note mentioned there > > "You must define static routes for certain inspection engines such as voice > to function properly" > > What is the above note pointing to ,I mean the scenario where a static > route > would be required on a transparent firewall. > > Thanks for the help > > Regards > Anantha Subramanian Natarajan > > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
