Hello,
Thanks.. It did not work for changing the DLCI to 422 but i tried to change it
to 412 and it worked.... I think there where some DLCI numbering issue...
Thanks for the suggestion..
Regards
> Date: Wed, 5 May 2010 13:21:36 +0100
> Subject: Re: [OSL | CCIE_Security] FW: Frame-relay Issue....
> From: [email protected]
> To: [email protected]
> CC: [email protected]; [email protected];
> [email protected]
>
> Hi Kings,
> Yes we can use "ip ospf network broadcast" - The caveat here is to
> 1. Ensure that the HUB is the DR by using ip ospf priority 0 on the spokes.
> 2. Ensure broadcast is allowed on your frame-relay maps.
>
> Again, using point-to-point and point-to-multipoint together would
> cause you to run into timers problem. Point to point has hello timer
> of 10 while p2mp has hello timer of 40.
>
> Sumit,
> Can you change the line " frame-relay map ip 88.88.23.2 402 broadcast"
> on R3 to " frame-relay map ip 88.88.23.2 422 broadcast" and see what
> you have?
>
>
>
>
>
> On 5/5/10, Kingsley Charles <[email protected]> wrote:
> > Can we use network broadcast type on frame-relay interfaces which is a NBMA
> > network?
> >
> > You have configured "ip ospf network broadcast" on the interfaces. Can you
> > try configuring ip ospf network point-point on the remote router and
> > point-multipoint on the hub frame-relay router.
> >
> > Not sure, lets wait for others input.
> >
> >
> >
> >
> > With regards
> > Kings
> > On Wed, May 5, 2010 at 4:45 PM, Sumit Mahla <[email protected]> wrote:
> >
> >>
> >>
> >> Can any one please help... I have one interface on R2 which i want to
> >> connect to two different router with frame relay...
> >>
> >> As per diagram (have a look at the attachment)
> >>
> >> R2 is Same as R2 of Diagram
> >> R3 is Same as R4 of Diagram
> >> R4 is same as R6 of Diagram
> >>
> >>
> >> R2
> >>
> >> interface Serial0/1/0
> >> no ip address
> >> encapsulation frame-relay
> >> no frame-relay inverse-arp
> >> !
> >> interface Serial0/1/0.1 multipoint
> >> ip address 88.88.24.2 255.255.255.0
> >> ip ospf network broadcast
> >> frame-relay map ip 88.88.24.4 216 broadcast
> >> no frame-relay inverse-arp
> >> !
> >> interface Serial0/1/0.2 multipoint
> >> ip address 88.88.23.2 255.255.255.0
> >> ip ospf network broadcast
> >> frame-relay map ip 88.88.23.3 224 broadcast
> >> no frame-relay inverse-arp
> >>
> >>
> >> Rack47R2#sh ip ospf neighbor
> >> Neighbor ID Pri State Dead Time Address
> >> Interface
> >> 88.88.0.4 1 FULL/DR 00:00:32 88.88.24.4
> >> Serial0/1/0.1
> >> 88.88.0.5 1 FULL/DR 00:00:38 88.88.25.5
> >> GigabitEthernet0/1
> >> Rack47R2#
> >>
> >>
> >> I do not have ospf neigbor ship up with R3 router.... could you please
> >> spot
> >> the config issue at router R2 given above?
> >>
> >>
> >>
> >>
> >>
> >> R4
> >>
> >> !
> >> interface Serial0/1/0
> >> ip address 88.88.24.4 255.255.255.0
> >> encapsulation frame-relay
> >> ip ospf network broadcast
> >> frame-relay map ip 88.88.24.2 612 broadcast
> >> no frame-relay inverse-arp
> >> !
> >>
> >>
> >>
> >> R3
> >>
> >> !
> >> interface Serial0/0/0
> >> ip address 88.88.23.3 255.255.255.0
> >> encapsulation frame-relay
> >> ip ospf network broadcast
> >> frame-relay map ip 88.88.23.2 402 broadcast
> >> no frame-relay inverse-arp
> >>
> >> Rack47R3#sh ip int br
> >> Interface IP-Address OK? Method Status
> >> Protocol
> >> FastEthernet0/0 88.88.33.3 YES NVRAM up
> >> up
> >> FastEthernet0/1 unassigned YES NVRAM administratively
> >> down
> >> down
> >> Serial0/0/0 88.88.23.3 YES NVRAM up
> >> up
> >> Loopback0 88.88.0.3 YES NVRAM up
> >> up
> >> Loopback33 33.33.33.33 YES manual up
> >> up
> >> Rack47R3#
> >>
> >>
> >>
> >>
> >>
> >> ------------------------------
> >>
> >> The latest auto launches and test drives Drag n'
> >> drop<http://autos.in.msn.com/>
> >>
> >> ------------------------------
> >> Catch the changing security environment Get it
> >> now.<http://news.in.msn.com/internalsecurity/>
> >>
> >> _______________________________________________
> >> For more information regarding industry leading CCIE Lab training, please
> >> visit www.ipexpert.com
> >>
> >>
> >
>
>
> --
> Best Regards,
>
> Tolulope.
_________________________________________________________________
Bollywood This Decade
http://entertainment.in.msn.com/bollywoodthisdecade/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
