Hi, please I am trying to configure NAC-802.1x. I cant see anything happening on the switch or on the ACS. I have turned on debugs
SW2#sh deb General OS: AAA Authentication debugging is on Radius protocol debugging is on Radius packet protocol debugging is on Auth Manager: Auth Manager errors debugging is on Auth Manager events debugging is on Auth Manager sync debugging is on dot1x: Dot1x registry info debugging is on Dot1x redundancy info debugging is on Dot1x packet info debugging is on Dot1x events debugging is on Dot1x State machine transitions and actions debugging is on Dot1x Errors debugging is on Dot1x Supplicant EAP-FAST debugging is on Dot1x Manager debugging is on Dot1x Supplicant State Machine debugging is on Relevant config include: SW2#sh run | i aaa|rad aaa new-model aaa authentication login default none aaa authentication dot1x gr group radius aaa authorization network default group radius aaa session-id common radius-server host 10.0.0.100 auth-port 1645 acct-port 1646 key CISCO radius-server vsa send authentication SW2#sh run int f0/20 Building configuration... Current configuration : 177 bytes ! interface FastEthernet0/20 switchport mode access authentication event no-response action authorize vlan 101 authentication port-control auto authentication periodic end I can reach the ACS and I have configured a NAP and installed certificates on the client and the server. Please can you point me to what's going on? -- Best Regards, Tolulope. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
