nope... but outside interface allows icmp from any to any........ This was my
mistake... access-group was not applied... i am so frustated since morning that
my brain has stopped working...
Date: Sun, 9 May 2010 09:47:41 +0200
Subject: Re: [OSL | CCIE_Security] Yusuf Lab 1 section 2.1
From: [email protected]
To: [email protected]
CC: [email protected]
Are you inspecting icmp in ASA?
/J
2010/5/9 Sumit Mahla <[email protected]>
It seems like today nothing is working out for me... :-( R6 loop 0 has ne
translated to 192.168.10.6 by doing outside static nat... on ASA2
Sw2#telnet 192.168.10.6
Trying 192.168.10.6 ... Open
User Access Verification
Password:
R6>exi
[Connection to 192.168.10.6 closed by foreign host]
Sw2#ping 192.168.10.6
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.10.6, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
Sw2#
why does the ping not works... and the telnet works..... ? Any idea?
Catch the changing security environment Get it now.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
--
-------
Jimmy Larsson
Ryavagen 173
s-26030 Vallakra
Sweden
http://blogg.kvistofta.nu
-------
_________________________________________________________________
Climate, controversies and the changing signatures of nature
http://green.in.msn.com/_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
