Brandon this is the output of GM's.... They register successfully.... but after 
failing rekey.... they again register... i did the same config two days 
back..... it was working...  none or GM is receiving rekeys.... on KS it pops 
ups sending rekey but it does not reach the GM...

 

i am missing something... that's for sure...

 

 

 

SECUREME-R2#sh crypto gdoi gm rekey
Group mygroup (Multicast)
    Number of Rekeys received (cumulative)       : 0
    Number of Rekeys received after registration : 0

Rekey (KEK) SA information :
          dst             src                          conn-id  my-cookie  
his-cookie
New     : 239.0.1.2       123.123.3.1         1008   B59B8ED3   90378E43
Current : ---             ---                       ---    ---        ---
Previous: ---             ---                       ---    ---        ---

 

 

ip multicast-routing

 

interface Tunnel41

 ip unnumbered Serial0/1/0.2
 ip pim dense-mode
 tunnel source Serial0/1/0.2
 tunnel destination 123.123.3.1

 

 

interface Serial0/1/0.2 multipoint
 ip address 123.123.41.1 255.255.255.0
 ip pim dense-mode
 ip ospf network broadcast
 frame-relay map ip 123.123.41.2 214 broadcast
 crypto map GMAP


 

ip mroute 123.123.3.1 255.255.255.255 Tunnel41

 

 

 

 

 

SECUREME-R3#sh crypto gdoi gm rekey
Group mygroup (Multicast)
    Number of Rekeys received (cumulative)       : 0
    Number of Rekeys received after registration : 0

Rekey (KEK) SA information :
          dst             src             conn-id  my-cookie  his-cookie
New     : 239.0.1.2   123.123.3.1         1005   02DF4C08   977A3340
Current : ---             ---               ---    ---        ---
Previous: ---             ---               ---    ---        ---


 

 

 

 

 

ip multicast-routing

 

interface Serial0/0/0
 ip address 123.123.41.2 255.255.255.0
 ip pim dense-mode
 encapsulation frame-relay
 ip ospf network broadcast
 frame-relay map ip 123.123.41.1 412 broadcast
 crypto map GMAP


 


 

 



 


Subject: Re: [OSL | CCIE_Security] GETVPN multicast server on Inside of 
Multicontext ASA
From: [email protected]
Date: Wed, 12 May 2010 12:12:44 +0200
CC: [email protected]
To: [email protected]

I'd need to see what's on the other end of the tunnel.  I can see that the KS 
is running multicast but what about the GM?  Is the GM failing the RPF check 
back the to KS?





Regards,


Brandon Carroll - CCIE #23837
Senior Technical Instructor - IPexpert
Mailto: [email protected]
Telephone: +1.810.326.1444
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130


IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio 
Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, 
Voice, Security & Service Provider) certification(s) with training locations 
throughout the United States, Europe, South Asia and Australia. Be sure to 
visit our online communities at www.ipexpert.com/communities and our public 
website at www.ipexpert.com


Platinum Solutions Group (PSG) provides high-end consulting services with a 
primary emphasis on Cisco's Data Center Solutions, Service Provider Solutions, 
Unified Communications and Security-enabled infrastructures. Be sure to visit 
www.platinumsolutionsgroup.com. 


On May 12, 2010, at 12:09 PM, Sumit Mahla wrote:

Any Suggestions?
 

 


From: [email protected]
To: [email protected]
Date: Wed, 12 May 2010 13:56:21 +0530
Subject: [OSL | CCIE_Security] GETVPN multicast server on Inside of 
Multicontext ASA

Hello All,
 
 
I configured GETVPN key server on the inside of ASA, and GM on outside...
 
GM are able to register.... (port 500 and 848 for udp are opened on the ASA)
 
but for multicast rekey's i configured a multicast tunnel with the follwoing 
config....
 
 
 
ON KEY SERVER     (config apart from getvpn)
 
ip multicast-routing
 
int tun15
 ip unnumb f0/0
 ip pim dense-mode
 tunnel sou f0/0
 tunn destination 123.123.41.1
 
int f0/0
 ip pim dense-mode
 
 
ip mroute 123.123.41.1 255.255.255.255 tun15
 
 
 
 
same kind of gre config on one of the GM...
 
 
 
I opened gre any any on ASA...  the same config was working few days back.. but 
today its not...
 
 
Could you please suggest ?
 
 



Invest your money wisely post Budget Sign up now. 


All the post budget analysis and implications Sign up now. 
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

                                          
_________________________________________________________________
Bollywood This Decade
http://entertainment.in.msn.com/bollywoodthisdecade/
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to