Hi Pieter It didn't work and also the ping for me from R5 works, as it goes through R4.
There is some problem mapping of the frame-relay switch. The frame-realy link between r5 and r6 is broken. With regards Kings On Sun, May 23, 2010 at 3:14 PM, Pieter-Jan Nefkens < [email protected]> wrote: > Hi Kings, > > Just a guess, as I'm not a rounting guy (yet), but in the labs so far, the > dlc usually is just the other way around per router, > so my guess on router 6 to router 5, the dlci would be > frame-relay interface-dlci 605 > > and there is also an option to do > frame-relay map ip <ipaddress> dlci as well > > > Kind regards > Pieter-Jan > > > On May 23, 2010, at 11:37 AM, Kingsley Charles wrote: > > Hi all > > I am doing Yusuf lab 1 now. On R6, Serial0/1/0.2 didn't have a dlci and > hence I configured 505 on a guess > > interface Serial0/1/0.2 point-to-point > ip address 192.168.65.6 255.255.255.0 > ip ospf network point-to-point > * frame-relay interface-dlci 505* > I added this > > > > > *R5* > > interface Serial0/1/0 > no ip address > encapsulation frame-relay > ! > interface Serial0/1/0.1 point-to-point > ip address 192.168.65.5 255.255.255.0 > ip ospf network point-to-point > frame-relay interface-dlci 605 > > > *R6* > > interface Serial0/1/0.1 point-to-point > ip address 192.168.64.6 255.255.255.0 > ip ospf network point-to-point > frame-relay interface-dlci 504 > ! > interface Serial0/1/0.2 point-to-point > ip address 192.168.65.6 255.255.255.0 > ip ospf network point-to-point > frame-relay interface-dlci 505 > > > After adding the DLCI, I am able to ping 192.168.65.5 from R6 but not able > to ping192.168.65.6 from R5. > > R5#ping 192.168.65.6 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 192.168.65.6, timeout is 2 seconds: > ..... > Success rate is 0 percent (0/5) > > R6#ping 192.168.65.5 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 192.168.65.5, timeout is 2 seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip min/avg/max = 32/32/32 ms > > > Any idea? > > With regards > KIngs > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > --- > > Nefkens Advies > > Enk 26 > > 4214 DD Vuren > > The Netherlands > > > Tel: +31 183 634730 > > Fax: +31 183 690113 > > Cell: +31 654 323221 > > Email: [email protected] > > Web: http://www.nefkensadvies.nl/ > > Think before you print. > > > > >
<<green.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
