Gents, The ranges do not work. However, some of "advanced" patterns work well i.e. "permit 10\.20\.1[234]*\.1". I think that only those regular expressions which are described in the documentation are supported. Hence, IMO only those should be tested on the lab.
Anyway, one more thing is important here. The pattern like "permit 10.20.30.*" is NOT proper as you simply use "." (dot) for matching. The correct one should be "permit 10\.20\.30\..*" HTH, Piotr 2010/5/22 Tyson Scott <[email protected]> > Kingsley, > > > > Test with the regular expression. I am not sure. There are some things > you can and can't do with this. This topic came up on groupstudy and I > don't remember the full results but I seem to recall ranges don't work but > the asterisk does. Double check. I wish I could remember the restrictions > but it is escaping my memory right now. I will have to go back and test. > > > > Regards, > > > > Tyson Scott - CCIE #13513 R&S, Security, and SP > > Technical Instructor - IPexpert, Inc. > > Mailto: [email protected] > > Telephone: +1.810.326.1444, ext. 208 > > Live Assistance, Please visit: www.ipexpert.com/chat > > eFax: +1.810.454.0130 > > > > IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, > Audio Tools, Online Hardware Rental and Classroom Training for the Cisco > CCIE (R&S, Voice, Security & Service Provider) certification(s) with > training locations throughout the United States, Europe, South Asia and > Australia. Be sure to visit our online communities at > www.ipexpert.com/communities and our public website at www.ipexpert.com > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Kingsley Charles > *Sent:* Saturday, May 22, 2010 12:15 PM > *To:* Piotr Matusiak > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_Security] Range of IP addresses in Shell > authorization commands > > > > OK thus we use regex. > > Thx Piotr > > With regards > Kings > > On Sat, May 22, 2010 at 6:21 PM, Piotr Matusiak <[email protected]> wrote: > > I think this is just pattern matching so below should work as well: > > permit 10\.20\.30\.[40-50] > > > 2010/5/22 Kingsley Charles <[email protected]> > > Hi all > > If I need to authorize a range of IP address 10.20.30.0/24 for telnet, I > did the following and it worked > > In the ACS, I configured the following: > > Command - telnet > Arguments - permit 10.20.30.* > > > Any other ways, like subnets masks or wild card masks > > > With regards > Kings > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
