They are hidden command. Just try typing these commands: show ip flow top 7 aggregate destination-address show ip flow top 7 aggregate source-address
With regards Kings On Wed, Jul 14, 2010 at 8:14 PM, Kingsley Charles < [email protected]> wrote: > Hi all > > There are two types of Netflow Top Talkers: > > > - Netflow Dynamic Top talkers CLI > - Netflow Top Talkers > > > The "Netflow Dynamic Top talkers CLI" takes the data from the main cache. > Either "ip flow ingress" or "ip flow egress" should be configured. You can > veiw using "sh ip top" > > The "Netflow top talkers" can be viewed only after configuring "ip > flow-top-talkers", then configure "sort" and "top" value. You can view the > top talkers using "sh ip flow top-talkers" > > > I am using 12.4(15)T13 C2800NM-ADVENTERPRISEK9-M and this does have the > support for "Netflow Dynamic Top talkers CLI" > > The command "sh ip flow top" seems to not present and it is same as sh ip > flow top-talkers > > router#sh ip flow top > % Top talkers not configured > > > router#sh ip flow top-talkers > % Top talkers not configured > > > Any idea? > > > > http://www.cisco.com/en/US/docs/ios/netflow/configuration/guide/nf_detct_analy_thrts_ps6441_TSD_Products_Configuration_Guide_Chapter.html > > > With regards > Kings >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
