You have used "nat" as the redundany group name. The name of the HSRP group should be configured as following: "Outside" is the HSRP group name that you are using....
ip nat Stateful id 1 redundancy outside mapping-id 1 as-queuing disable protocol udp With regards Kings On Thu, Jul 22, 2010 at 11:56 AM, Vybhav Ramachandran <[email protected]>wrote: > Hello all, > > I was trying out SNAT this morning, but i could'nt get it working. > > Please refer to http://tacack.pastebin.com/GZxYq3rU for the toplogy and > the configs of the HSRP routers. > > When i trigger a NAT translation on the active router, i do not see the > translation being duplicated on the standby router. > When i run I keep getting the following message -> "HSRP : Redundancy > enquiry for NAT failed" on both the HSRP peers. > > Any idea what the error could be? > > Thanks and cheers! > TacACK > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
