Thanks, Dave. -----Original Message----- From: Dave Craddock [mailto:[email protected]] Sent: 25 July 2010 09:28 PM To: Johan Bornman Cc: 'Jimmy Larsson'; 'OSL Security' Subject: RE: [OSL | CCIE_Security] V1 Lab3 - IPS
Anything that has the gui built in you can use it so ids,acs. Anything where the gui is an add on its not avaliable so asa,routers Dave ----- Original Message ----- From:"Johan Bornman" <[email protected]> To:"'Jimmy Larsson'" <[email protected]> Cc:"'OSL Security'" <[email protected]> Sent:25/07/2010 7:04 PM Subject:Re: [OSL | CCIE_Security] V1 Lab3 - IPS Thanks, Jimmy. From: Jimmy Larsson [mailto:[email protected]] Sent: 25 July 2010 07:37 PM To: Johan Bornman Cc: OSL Security Subject: Re: [OSL | CCIE_Security] V1 Lab3 - IPS Yes, the IDM is available. Ive forced myself to use CLI (setup with advanced settings) to setup interfaces just to get l2 up and running, then I do fine tuning from IDM. /J 2010/7/25 Johan Bornman <[email protected]<mailto:[email protected]>> Hi, Most configs in this lab are done via the IDM. 1. Will the IDM be available in the lab? 2. Should I be familiar with the cli stuff for tasks in this lab or can I always use the IDM on lab day, where possible. Thanks Johan _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com> -- ------- Jimmy Larsson Ryavagen 173 s-26030 Vallakra Sweden http://blogg.kvistofta.nu ------- _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
