Hi all The following are some important parameters for configuring sla monitoring:
- timeout - num-packets - frequency asa1(config-sla-monitor-echo)# ? IP SLA Monitor Echo Configuration Commands: default Set a command to its defaults exit Exit probe configuration * frequency Frequency of an operation* no Negate a command or set its defaults * num-packets Number of Packets* request-data-size Request data size threshold Operation threshold in milliseconds *timeout Timeout of an operation* tos Type Of Service <cr> Frequency should be always greater than timeout. With the following configuration, please let me know if my understanding is correct: timeout - 5000 ms num-packets - 4 packet frequency - 60 s 1st packet is sent and response is expected within 5000 ms 2nd packet is sent after 60 s and response is expected within 5000 ms 3rd packet is sent after 60 s and response is expected within 5000 ms 4th packet is sent after 60 s and response is expected within 5000 ms Please answer the following queries: - If the response comes after 5000 ms, will the sla consider it or not? - What is the criteria for the sla to fail? If it gets response for 1 out of 4 packets, then will it be considered as a pass? - What does the frequency parameter actually do? Each packet can be sent after the timeout right? With regards Kings
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
