Your rule, translates the source port. But actually, you need to translate destination port, hence the 2nd rule is correct.
With regards Kings On Sun, Dec 19, 2010 at 2:49 PM, kamran shakil <[email protected]>wrote: > just to inquire: > ================== > > for a task that says Configure IPS sesonor to be managed on port 6783 > having IP 172.17.33.15, connct from the > CA/ACS PC using the destination of 50.50.3.15 on tcp port 5796. > > Plz note that IPS was on the dmz, whereas ACA/CA PC is on the inside! > > > my solution was : > ================== > static (inside,dmz) tcp 172.17.33.15 6783 50.50.3.15 5796 > > > but the answer given in a workbook is : > ======================================= > > static (dmz,inside) tcp 50.50.3.15 5796 172.17.33.15 6783 > > > > I just know the in static command syntax, first we define the source and > then > the destination, plz check above and comment on this. EXPERTS advice > reqd!!! > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
