Dear Yousef, Priority is mostly used with delay sensitive traffic like video and voice , while bandwidth is used for data type of traffic for eg:- ssh , telnet , http etc.....
sometypes you can use priority also if you have some transaction based traffic like SQL queries going live !!!! I think you might get similar answers from others ! good day . kamran. -----Original Message----- From: [email protected] on behalf of yusef sheriff Sent: Wed 12/22/2010 12:47 PM To: [email protected] Subject: [OSL | CCIE_Security] Advance security - MQC Dear All, I was doing advance security tab. i found the below question: On R2, http and ssh traffic should both be prioritized and given 25% of interface bandwidth on s0/0/0. my solution is:- R2(config)#class-map match-any PRIORITY R2(config-cmap)#match protocol ssh R2(config-cmap)#match protocol http R2(config)#policy-map OUTGOING R2(config-pmap)#class PRIORITY R2(config-pmap-c)#priority percent 25 WB Solutions R2(config)#class-map match-any PRIORITY R2(config-cmap)#match protocol ssh R2(config-cmap)#match protocol http R2(config)#policy-map OUTGOING R2(config-pmap)#class PRIORITY R2(config-pmap-c)#bandwidth percent 25 R2(config-pmap)#int s0/0/0 R2(config-if)#service-policy out OUTGOING can any one clarify on difference between bandwidth and priority? also like to know which solution is correct. Regards, Yusef _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
