Hi, I need help because I cant get this working:
R4(Client)-----------------|ASA no NAT| ------------------- R2 (server) Easy VPN Client (R4): crypto ipsec client ezvpn Easyvpn connect auto group Easyvpn key cisco mode client peer 16.16.4.2 username cisco password cisco xauth userid mode local interface FastEthernet0/0 ip address 12.12.6.4 255.255.255.0 duplex auto speed auto crypto ipsec client ezvpn Easyvpn ! interface FastEthernet0/1 ip address 12.12.12.4 255.255.255.0 duplex auto speed auto crypto ipsec client ezvpn Easyvpn inside __________________________________________ ASA (No NAT): access-list in-outside extended permit esp host 12.12.6.4 host 12.12.4.2 access-list in-outside extended permit udp host 12.12.6.4 host 12.12.4.2 eq isakmp _______________________________________________________________________ R2(Server): aaa authentication login userlist local aaa authentication login LINES line aaa authorization network groupist local crypto isakmp policy 10 encr 3des authentication pre-share group 2 crypto isakmp key cisco address 0.0.0.0 0.0.0.0 crypto isakmp client configuration group Easyvpn key cico domain cisco.com pool ippool acl split save-password crypto isakmp profile easyvpn match identity group Easyvpn client authentication list userlist isakmp authorization list groupist client configuration address respond virtual-template 2 crypto ipsec transform-set myset esp-3des esp-sha-hmac crypto ipsec profile easyvpn set transform-set myset set isakmp-profile easyvpn interface Virtual-Template2 type tunnel ip unnumbered FastEthernet0/0 tunnel source FastEthernet0/0 tunnel mode ipsec ipv4 tunnel protection ipsec profile easyvpn ip local pool ippool 12.12.22.1 12.12.22.5 ip access-list extended split permit ip 192.186.2.0 0.0.0.255 any Does somebody can help me were my failure is ? Thanks, Bobby
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
