Thanks, Kamran. I lab'd it up a few times today and had no problem, this is without following any of the suggestions I received. Not sure what I did wrong yesterday.
-----Original Message----- From: Kamran Shakil [mailto:[email protected]] Sent: 03 February 2011 07:57 PM To: Mark Senteza; Johan Bornman Cc: OSL Security Subject: RE: [OSL | CCIE_Security] WEBVPN on ASA i think we get similar issue with the ipsec RA or L2L type command of VPN in ASA as well ? -----Original Message----- From: [email protected] on behalf of Mark Senteza Sent: Thu 2/3/2011 12:23 AM To: Johan Bornman Cc: OSL Security Subject: Re: [OSL | CCIE_Security] WEBVPN on ASA You need to define your group-policy as "internal" first before the ASA will enable you to configure the group-policy attributes. So run "group-policy WEBVPN internal" then "group-policy WEBVPN attributes" will become available for you to run Mark On Wed, Feb 2, 2011 at 11:30 AM, Johan Bornman <[email protected]> wrote: Hi, I am missing the attributes command: ASA2(config)# group-policy WEBVPN ? configure mode commands/options: external Enter this keyword to specify an external group policy internal Enter this keyword to specify an internal group policy Looking for: group-policy WEBVPN attributes Thanks Johan _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
