I had heard something like that before. It could be that Andrey. Thanks for tip. I ain`t tested yet but I`ll let you know
On Wed, Apr 13, 2011 at 3:11 PM, Andrey <[email protected]> wrote: > Bruno, > > It seems that you need add permit statement into your downloadable acl for > protocol that you use to authenticate with > mm, i > Best regards, > Andrey > > On Wed, Apr 13, 2011 at 8:10 PM, Bruno <[email protected]> wrote: > >> Hey, >> I am using radius to download the ACLs. Everything is fine, the ACLs are >> being downloaded fine you shown below >> >> Rack1ASA1(config)# sh uauth >> Current Most Seen >> Authenticated Users 1 2 >> Authen In Progress 0 1 >> user 'admin' at 10.0.0.100, authenticated >> access-list #ACSACL#-IP-toR6-4da5a8c4 (*) >> absolute timeout: 0:05:00 >> inactivity timeout: 0:00:00 >> >> I am using HTTPS as well. I can reach out my destination fine >> >> The only thing that`s bothering me is on the web browser, it shows >> "Authentication failed" on the pop-up screen after I supply user/pass. >> >> Is this anything I should be concerned with? As I accomplished the goal, >> not sure if this screens can be fixed or if it needs to be fixed >> >> Let me know your thoughts >> >> -- >> Bruno Fagioli (by Jaunty Jackalope) >> Cisco Security Professional >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > -- Bruno Fagioli (by Jaunty Jackalope) Cisco Security Professional
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
