dot1x pae authenticator is the only one old fashioned way which gets not converted
On Wed, Apr 20, 2011 at 8:38 PM, Richard Chan <[email protected]>wrote: > This will show up in later images such as 12.55(SE). > IOS automatically converts it to the new syntax. > > I recall, (poss Vol 2 Lab 12 task) one other commands stays as "dot1x.."; > like "dot1x reauthentication". Everything else in that task got converted > to the new syntax. > > Richard > > > On Wed, Apr 20, 2011 at 10:09 PM, Bruno <[email protected]> wrote: > >> Hey guys, >> >> Damn, what are these commands below which showed up after a configured >> normal dot1x commands like dot1x port-control, guest-vlan and auth-fail vlan >> >> interface FastEthernet0/17 >> switchport mode access >> authentication event fail action authorize vlan 200 >> authentication event no-response action authorize vlan 201 >> authentication port-control auto >> dot1x pae authenticator >> >> -- >> Bruno Fagioli (by Jaunty Jackalope) >> Cisco Security Professional >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > -- Bruno Fagioli (by Jaunty Jackalope) Cisco Security Professional
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
