Kings, If is logical OR it should be "ANY" and if it is logical "AND" it should be "ALL".
I believe this was a typo , coz in the condition statement they mention *"port-filter policy to drop all traffic destined to closed or "nonlistened" ports except NTP. " *but the policy used is default ( which is match-all) so it should be a typo With best regards, Parvees M Davida CCNP ,CISSP,JNCIS-FWV,ITIL V3 On Sat, May 7, 2011 at 10:37 AM, Kingsley Charles < [email protected]> wrote: > Hi all > > Should we use "match-all" or "match-any", when using multiple criterias in > the port-filter class-map. I thought "any" was the correct one. > > > Snippet from > http://www.cisco.com/en/US/docs/ios/qos/configuration/guide/ctrl_plane_prot_ps6441_TSD_Products_Configuration_Guide_Chapter.html > > Router(config)# class-map type port-filter pf-class > > Router(config-cmap)# match not port udp 123 > > Router(config-cmap)# match closed-ports > > Router(config-cmap)# exit > > Router(config)# policy-map type port-filter pf-policy > > Router(config-pmap)# class pf-class > > Router(config-pmap-c)# drop > > Router(config-pmap-c)# end > > > > With regards > Kings > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
