Have you tried to use packet-tracer on asa? I don't know ASA defaults well, but I would bet that some default "not-sending-echo-reply-on-outside" or any other funny feature is working in the background ;)
Regards, Marcin -------------------------------------- Hi , No connectivity between ASA1 and R5 I'm stuck can please help me to identifies what is wrong !!! support team of proctorlabs say that have verified that all interfaces on ASA-1 and R5 are in the up / up state so layer one connectivity is working both devices R5 and ASA-1 are connected on the same Switch and the respectively port are on the same Vlan 5 Cat 3 interface FastEthernet0/5 -----> connected to R5 switchport access vlan 5 switchport mode access spanning-tree portfast end interface FastEthernet0/10--------> connected to ASA1 ethernet 0/0 switchport access vlan 5 switchport mode access spanning-tree portfast end sh vlan 5 VLAN0005 active Fa0/5, Fa0/10 ------------------------------------- Router 5 interface FastEthernet0/1 ip address 10.1.5.5 255.255.255.0 ASA1 interface Ethernet0/0 ip address 10.1.5.10 255.255.255.0 nameif outside no shut no connectivity between ASA1 and R5 I'm stuck can please help me to identifies what is wrong !!! _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
