Found the MIB name. Configure "snmp-server enable traps config"
"config" sends 1.3.6.1.4.1.9.9.43.2 (ciscoConfigManMIB.2) traps which is required for RMON. With regards Kings On Sat, May 7, 2011 at 8:31 PM, Kingsley Charles <[email protected] > wrote: > Hi all > > When configuring IOS router for RMON, what is the mib name that should be > specified with the command "snmp-server enable traps" > > rmon event 1 log trap CISCO description "Interface overrun" owner CISCO > rmon event 2 log trap CISCO description "Interface underrun" owner CISCO > rmon alarm 1 ifInUcastPkts.1 60 delta rising-threshold 12 1 > falling-threshold 6 2 > > > snmp-server host 1.2.3.4 cisco > > > > When enabling snmp debugs, I found that MIB "ciscoConfigManMIB.2" is being > used but can't find it MIB keywords presented with "snmp-server enable > traps" > > With regards > Kings >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
