This is not possible Regards,
Tyson Scott CCIE # 13513 (R&S, Security, SP) Managing Partner/Technical Instructor - IPexpert Inc. [email protected] ----- Reply message ----- From: "Umberto Nobile" <[email protected]> Date: Thu, May 26, 2011 4:07 pm Subject: [OSL | CCIE_Security] ASA REDUNDANT INTERFACE IN MULTICONTEXT CONTEXT ENVIRONMENT To: "[email protected]" <[email protected]> Is it possible to configure a redundant interface (in the system context), so that the first interface member is active on the primary unit while the second one is active in the secondary unit? I try to explain : ASA1: Interface Redundant 1 Member-interface e0/0 Member-interface e0/1 ASA1(config)#redundant-interface redundant 1 active-member e0/0 (not mandatory) ASA2: Interface Redundant 1 Member-interface e0/0 Member-interface e0/1 ASA1(config)#redundant-interface redundant 1 active-member e0/1 All It works fine until I put failover command on the primary and then on secondary unit. When the primary unit ends to replicate its config to secondary one, the active member interface is the same on both unit ( e0/0 (active) ) Umberto Nobile
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
