Try taking out: network 0.0.0.0 on both router/ASA- this is not needed.
JT On Thu, Jun 2, 2011 at 5:38 PM, Rogerio Freitas <[email protected]> wrote: > Guys, > > I have a strange problem here with EIGRP (GNS3), I can't see the default > route in the router only when I include a manual default gateway in the > peer. I have the following configuration: > > *ASA:* > > router eigrp 1 > no auto-summary > network 136.1.124.0 255.255.255.0 > network 150.1.4.0 255.255.255.0 > network 0.0.0.0 0.0.0.0 > redistribute static > > route outside 0.0.0.0 0.0.0.0 150.1.4.1 > > *Router:* > > router eigrp 1 > redistribute static > network 136.1.124.0 0.0.0.255 > network 150.1.4.0 0.0.0.255 > network 0.0.0.0 > no auto-summary > > Look the response of commands: > > R4#show ip protocols > Routing Protocol is "eigrp 1" > Outgoing update filter list for all interfaces is not set > Incoming update filter list for all interfaces is not set > Default networks flagged in outgoing updates > Default networks accepted from incoming updates > EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0 > EIGRP maximum hopcount 100 > EIGRP maximum metric variance 1 > Redistributing: static, eigrp 1 > EIGRP NSF-aware route hold timer is 240s > Automatic network summarization is not in effect > Maximum path: 4 > Routing for Networks: > 136.1.124.0/24 > 150.1.4.0/24 > *0.0.0.0 > * Routing Information Sources: > Gateway Distance Last Update > 136.1.124.12 90 01:50:16 > Distance: internal 90 external 170 > > > R4#show ip route > Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 > E1 - OSPF external type 1, E2 - OSPF external type 2 > i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS > level-2 > ia - IS-IS inter area, * - candidate default, U - per-user static > route > o - ODR, P - periodic downloaded static route > > Gateway of last resort is not set > > 136.1.0.0/24 is subnetted, 2 subnets > D 136.1.121.0 [90/30720] via 136.1.124.12, 01:53:16, FastEthernet0/0 > C 136.1.124.0 is directly connected, FastEthernet0/0 > 10.0.0.0/24 is subnetted, 1 subnets > D 10.0.0.0 [90/28416] via 136.1.124.12, 01:53:16, FastEthernet0/0 > 150.1.0.0/24 is subnetted, 1 subnets > C 150.1.4.0 is directly connected, Loopback0 > > > > Any idea? > > > Best Regards, > > Rogerio Freitas > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
