Hi, Take a look at: http://www.cisco.com/en/US/docs/security/asa/asa82/command/reference/i3.html#wp1886194
Regards, Piotr 2011/6/15 Richard Chan <[email protected]> > > Question about Windows L2TP to ASA split tunneling with > tunnel-network-list: > > 1. If I enable "Use default gateway on remote network" I get no split > tunneling (as expected). > Client gets a default route to ASA > > 2. If I uncheck "Use default gateway on remote network" I only get one > network route to ASA; > it does not seem to download the tunnel-network-list to determine split > tunnel networks like VPN Client/AnyConnect > > ip local pool POOL-L2TP 10.20.20.1-10.20.20.200 > access-list SPLIT per ip 10.0.0.0 255.0.0.0 any > access-list SPLIT per ip 172.16.0.0 255.255.0.0 any > > group-policy DfltGrpPolicy attributes > vpn-tunnel-protocol IPSec l2tp-ipsec > split-tunnel-policy tunnelspecified > split-tunnel-network-list value SPLIT > > I get a route 10.0.0.0/8 to the ASA. > But the tunnel-network-list is ignored; is this expected behaviour? > > Richard > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
