can you paste your config and related commands output? in general to make it work on IOS you must use "netmask" command and to make it work on ASA you must add netmask to "ip local pool" command.
Regards, Piotr 2011/6/25 Serious CCIE <[email protected]> > Hi Everyone - thanks for the replies... > I was trying to do it on ASA. > > @ Piotr - I've tried that but I was still getting /32 - any idea? > > > "I have tried putting subnet mask in client config on Server but still I > get /32 bit subnet mask." > > > On Fri, Jun 24, 2011 at 2:35 AM, Piotr Matusiak <[email protected]> wrote: > >> if this is IOS then under group configuration there is "netmask" command. >> >> Regards, >> Piotr >> >> >> 2011/6/23 Serious CCIE <[email protected]> >> >>> VPN-SERVER-------------Internet---------VPN-CLIENT >>> >>> Is it possible when client get's an IP address from the POOL1 have a >>> subnet mask of 255.255.255.0 for example? >>> >>> In most cases when client dials into the server it gets an IP address and >>> the default subnet mask of /32 (192.159.1.39/255.255.255.255) >>> >>> I have tried putting subnet mask in client config on Server but still I >>> get /32 bit subnet mask. >>> >>> thanks >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out >>> www.PlatinumPlacement.com >>> >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
