As you can see the second connection is recognized as TCP so that no L7 inspection is done on it.
Regards, Piotr 2012/2/12 Adil Pasha <[email protected]> > In YB Lab 2 if I add "ip port-map http 8080" command it works and if I > remove it the connection from R6 to SW3 still works. > > Could someone please tell me what is the use of ip port-map command with > CBAC and why is it working with or without? > > R4y2#sh ip inspect sessions > Established Sessions > Session 481756D8 (172.16.46.6:42921)=>(172.16.41.23:8080) http SIS_OPEN > R4y2#sh ip inspect sessions > > R4y2#conf t > Enter configuration commands, one per line. End with CNTL/Z. > R4y2(config)#no ip port-map http port 8080 > R4y2(config)#end > R4y2# > *Feb 12 12:52:44.248: %SYS-5-CONFIG_I: Configured from console by console > R4y2# > R4y2#sh ip inspect sessions > Established Sessions > Session 481756D8 (172.16.46.6:57806)=>(172.16.41.23:8080) tcp SIS_OPEN > R4y2# > > > Best Regards. > ______________________ > Adil > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
