Check if you have "Interface Configuration > Advanced Options > Per-user TACACS+/RADIUS Attributes" marked. After turning it on, you'll see separate columns (for User and for Group) in "Interface Configuration/TACACS+ (Cisco)". Mark specific TACACS option in User column and it should be visible in User settings.
I've just checked my fresh ACS installation (with the default config) and I had to follow these steps to see TACACS options in user settings: 1. Add a network device as TACACS+ AAA Client (in "Network Configuration") 2. Turn on Interface Configuration > Advanced Options > Per-user TACACS+/RADIUS Attributes (after that separate User and Group columns are available in "Interface Configuration/TACACS+ (Cisco)") 3. Turn on Interface Configuration > Advanced Configuration Options > Advanced TACACS+ Features (optional) 4. Mark specific option in Interface Configuration > TACACS+ (Cisco) (after this step you should see this option in User settings). I hope it will be helpful for you. Marta Sokolowska. 2012/3/7 Mike Rojas <[email protected]> Hi Martha, > > Yeah, Basically the tacacs settings where there is a box to check Exec and > then add the value for privilege level, I am only able to see that at the > group level, not under User. On the ACS at work (when I do most of my labs) > I can see it under each user. > > On the interface configuration, I am sure that I already enable it, but > cant see it. Is there something else that I need to put? >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
