Thank you Champs. On Friday, March 16, 2012, Piotr Matusiak <[email protected]> wrote: > There are 3 pools used: > > 1-511 > 512-1023 > 1024-65535 > > You can check it using 'sho nat pool' command on ASA v8.3 and above. > > ciscoasa(config)# sh nat poo > UDP PAT pool outside, address 100.1.1.1, range 1-511, allocated 0 > UDP PAT pool outside, address 100.1.1.1, range 512-1023, allocated 0 > UDP PAT pool outside, address 100.1.1.1, range 1024-65535, allocated 4 > UDP PAT pool inside, address 10.1.1.1, range 1-511, allocated 0 > UDP PAT pool inside, address 10.1.1.1, range 512-1023, allocated 0 > UDP PAT pool inside, address 10.1.1.1, range 1024-65535, allocated 4 > > > > The port allocation changed some time ago due to bug CSCsr28008. > > Regards, > Piotr > > > > 2012/3/16 Fawad Khan <[email protected]> >> >> Could any find guide me to a link or explain me the following please? >> I am trying to find the source port numbers which an ASA uses when its running at NAT Overload (interface NAT) to reach to external resources. e.g. >> inter eth0/0 >> nameif outside >> ip add 10.1.1.1 255.255.255.0 >> inter eth0/1 >> nameif inside >> ip add 10.2.2.2 255.255.255.0 >> >> nat (inside) 1 0.0.0.0 0.0.0.0 >> global(outside) 1 interface <<<< what will be the source port numbers that the ASA will use for this part??? I think they are random, but I want to know the range. >> >> >> Thank you. >> FNK >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com > >
-- FNK
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
