I believe this from yousuf bhaiji lab, right?

Traffic will flow based on available route. If the spokes have route to
each other than they will talk directly to each other without contacting
the hub. What you are seeing is pretty much what the lab want.

On Saturday, March 31, 2012, Piotr Matusiak wrote:

> I cannot get your topology, but anyway in DMVPN Phase 2 the spoke will
> always send some initial packets through the hub and then tries to set up
> direct spoke-to-spoke tunnel. If this is not possible the traffic will go
> thru the hub all the time.
>
> Regards,
> Piotr
>
>
> 2012/3/31 Mike Rojas <[email protected] <javascript:_e({}, 'cvml',
> '[email protected]');>>
>
>>  Hello All,
>>
>> So this is something fun, check this out:
>>
>>                         Router 1 (Hub)  172.1.0.1
>>                                |
>>       172.1.0.2           |
>>   Router2 (Spoke    ASA
>>                                |
>>                                |
>>                              IPS
>>                                |
>>                            Router6
>>    172.1.0.4              |
>>       Router4(Spoke)  |
>>
>> So I was playing around and said, hey in Phase 2, it requires the spokes
>> to create on demand tunnels without having to pass across the hub right,
>> so, I am going to play mean and wont let the ASA to pass that traffic.
>> Then, I tried to ping from Router 2 to the protected network on Router 4 it
>> worked..... I was like .... well, this is a bitter disappointment, however,
>> it did try to build the tunnel, it didnt care, but instead I am assuming
>> that it went to the hub and relay the traffic there. Here are the outputs:
>>
>> Router2
>>
>>      44.0.0.0/24 is subnetted, 1 subnets
>> D       44.44.44.0 [90/28288000] via 172.1.0.4, 00:01:40, Tunnel0
>>
>>
>> IPv4 Crypto ISAKMP SA
>> dst             src             state          conn-id status
>> 192.168.3.11    192.168.4.11    QM_IDLE           2002 ACTIVE
>> 192.168.64.4    192.168.4.11    MM_NO_STATE          0 ACTIVE<---------------
>>
>> It is in case if you guys have any comments or can explain it better, cuz
>> this clearly kills my theory of how this works... :P
>>
>> Cheers,
>>
>> Mike
>>
>>
>> _______________________________________________
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>

-- 
FNK
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to