Folks, Anyone can give me a clue why the switch reports the status of the port configured for MAC authentication bypass as "UNAUTHORIZED" ? Based on the output below the authorization session succeeded but the summary for dot1x says it is unauthorized. Is it expected ?
.May 1 02:25:34.108: %AUTHMGR-5-START: Starting 'mab' for client (0015.f956.e389) on Interface Fa0/2 AuditSessionID 0A000008000000368C2CD8E4 .May 1 02:25:34.142: %MAB-5-SUCCESS: Authentication successful for client (0015.f956.e389) on Interface Fa0/2 AuditSessionID 0A000008000000368C2CD8E4 .May 1 02:25:34.142: %AUTHMGR-7-RESULT: Authentication result 'success' from 'mab' for client (0015.f956.e389) on Interface Fa0/2 AuditSessionID 0A000008000000368C2CD8E4 .May 1 02:25:34.142: %AUTHMGR-5-VLANASSIGN: VLAN 30 assigned to Interface Fa0/2 AuditSessionID 0A000008000000368C2CD8E4 .May 1 02:25:34.645: %AUTHMGR-5-SUCCESS: Authorization succeeded for client (0015.f956.e389) on Interface Fa0/2 AuditSessionID 0A000008000000368C2CD8E4 .May 1 02:25:35.174: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/2, changed state to up SW2#sh dot1x all sum Interface PAE Client Status -------------------------------------------------------- Fa0/2 AUTH none UNAUTHORIZED Fa0/5 AUTH 001d.72e2.634c AUTHORIZED Eugene
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
