I like it better, Alexei ;) Specifically the fact that MF is set to 0 in the last fragment. Have you intentionally omitted the mask for IP flags eq 1 in your access-control class-map? As far as I understand it mask is the only way to match on the right flag (DF or MF). I tried doing something similar and used the length field set to 500 as an example (match field IP length gt 500). It actually did make difference. I wasn't able to send pings 501 byte of size.
Eugene From: Alexei Monastyrnyi <[email protected]<mailto:[email protected]>> Date: Tuesday, June 5, 2012 8:17 PM To: Eugene Pefti <[email protected]<mailto:[email protected]>> Cc: Mike Rojas <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [OSL | CCIE_Security] FPM ICMP large Packets Eugene, here is my take on it. Let's get ICMP fragmented and see what fields we should match. R4(config-cmap)#do sh run class-map Building configuration... Current configuration : 222 bytes ! class-map type stack match-all CM_FPM_IP_ICMP match field IP protocol eq 1 next ICMP class-map type access-control match-any CM_FPM_ICMP_FRAGMENTS match field IP flags eq 1 match field IP fragment-offset gt 0 ! end R4(config-cmap)#do sh run policy-map Building configuration... Current configuration : 206 bytes ! policy-map type access-control PM_FPM_ICMP_FRAGMENTS class CM_FPM_ICMP_FRAGMENTS log policy-map type access-control PM_FPM_IP_ICMP class CM_FPM_IP_ICMP service-policy PM_FPM_ICMP_FRAGMENTS ! end R3 fa01 - 180.6.34.0/24<http://180.6.34.0/24> -- fa0/0 R4 PM_FPM_IP_ICMP is applied inbound on Fa 0/0 of R4. First, as you can see, there is no IP length field in my class-map, because it is always less or equal than 1500. The most generic scenario is that we have 3 type of fragments and those IP header fields should be set as per below: - initial fragment -> IP Length = 1500 MF flag = 1 Fragment Offset = 0 - non-initial fragment -> IP Length = 1500 MF flag = 1 Fragment Offset > 0 - last fragment -> IP Length < 1500 MF flag = 0 Fragment Offset > 0 In some solution they match on IP length too, which IMO achieves nothing. Am I missing sonething? Cheers A. On 4 June 2012 15:37, Eugene Pefti <[email protected]<mailto:[email protected]>> wrote: Sorry, didn't mean to send it yet. Starting it all over: If you don't mind, guys, I'd start some sort of compilation of FPM related knowledge here, specifically that we need to know and which is not easily available as a reference in Cisco docs. 1. Protocol numbers. So far we have to remember only three numbers (mostly) - 1 (ICMP), 6 (TCP), 17 (UDP) An accompanying question, is it good to specify them in decimal when defining the stack type class-map, i.e. I want to match for UDP protocol in the IP header class-map type stack IP-UDP-CLASS match field IP protocol eq 17 next UDP And another one, is mask a loose parameter that can always be left off here ? 2. I found that I can't retain in my head what goes first in the Flags field of IP header, DF or MF. Is there any reference in Cisco docs that could be looked up during the exam? Let's take Mike's example with fragmented packets. King's solution is as follows (I quote it): You should match packets with FO> 0 and Flags = 1. For the first packet F0=0 and Flags=1 For other packets F0>0 For the last packet FO>0 and flags with be 1. Hence the following is the solution. rtr(config)# class-map type access-control match-any fragudp rtr(config-cmap)# match field ip flags eq 1 mask 6 rtr(config-cmap)# match field ip fragment-offset gt 0 2.1 When you say "Flags=1" in the first line what flag do you mean? I'd assume MF (More Fragments). 2.2 When you mention flags in the third line as should be set to 1 again, what flags did you mean, MF or DF? If MF, why would IP stack care about MF in the last packet? 2.3 You say that we have to match for packets with FO>0 and Flags=1, why does the class-map have "match-any" option? 2.4 If I were to match on DF flag then I'd need to set mask to 5 ? Are there any conditions that I'd need to care and be prepared to match for the DF flag? Enough for now ;) Eugene From: Eugene Pefti <[email protected]<mailto:[email protected]>> Date: Sunday, June 3, 2012 10:09 PM To: Mike Rojas <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [OSL | CCIE_Security] FPM ICMP large Packets I feel sorry for you, Mike, but I know that you like all others here will definitely do it next time. I start feeling that FPM is the most intimidating subject on the exam ;) If you don't mind, guys, I'd start some kind of compilation of FPM related knowledge here, specifically that we need to know and which is not easily available as a reference in Cisco docs. 1. Protocol numbers. So far we have to remember only three numbers (mostly) - 1 (ICMP), 6 (TCP), 17 (UDP) From: Mike Rojas <[email protected]<mailto:[email protected]>> Date: Sunday, June 3, 2012 2:25 PM To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>, "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>> Subject: Re: [OSL | CCIE_Security] FPM ICMP large Packets Oh no Kings, I failed it because I suck at it... a got an FPM question where you had to do something about the ICMP packet size... I was looking a question more like finding something inside of the payload... some you win some you loose... Cheers! Mike ________________________________ Date: Sun, 3 Jun 2012 10:56:59 +0530 Subject: Re: [OSL | CCIE_Security] FPM ICMP large Packets From: [email protected]<mailto:[email protected]> To: [email protected]<mailto:[email protected]> Mike, did you fail in the CCIE lab? And is it due to the wrong solution of FPM? With regards Kings On Sun, Jun 3, 2012 at 3:08 AM, Mike Rojas <[email protected]<mailto:[email protected]>> wrote: I just want to recall one of the Replies from Kingsley... BTW I failed the test.... http://onlinestudylist.com/archives/ccie_security/2012-February/029078.html Mike _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com/> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.platinumplacement.com/> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com/> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com<http://www.platinumplacement.com/>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
