Thanks Kings..so should i give ip unnumbered and tunnel mode for the client dvti ? --- On Sun, 10/6/12, Kingsley Charles <[email protected]> wrote:
From: Kingsley Charles <[email protected]> Subject: Re: [OSL | CCIE_Security] DVTI on Ezvpn Client To: "Deepak N" <[email protected]> Cc: "OSL CCIE-Security" <[email protected]> Date: Sunday, 10 June, 2012, 8:21 AM Yes you need it. It will add a route for you automatically With regards Kings On Sun, Jun 10, 2012 at 11:28 AM, Deepak N <[email protected]> wrote: Hi, Is a DVTI really required on the ezvpn client , and should it be referenced under 'crypto ipsec client' using virtual-interface 1 ? I noticed that even without it, it works. This is what i have on my client: crypto ipsec client ezvpn ez connect auto group ezvpn key cisco local-address FastEthernet0/0 mode client peer 192.168.2.2 username cisco password cisco xauth userid mode local interface Virtual-Template1 type tunnel no ip address _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
