How would I dig it around, guys ?
I have three routers in DMVPN cloud. They established full connectivity and
adjacency in the so-called Phase 2 (all traffic goes via the Hub router).
I configured "ip nhrp redirect" and "ip nhrp shortcut" on all tunnel interfaces
but the traffic between two spokes still flows through the hub router.
E.g. R5 (10.255.5.5) and R4 (10.255.4.4) are spokes. R1 (10.255.1.1) is the hub.
R5#show ip route ospf
10.0.0.0/8 is variably subnetted, 7 subnets, 2 masks
O 10.255.255.1/32 [110/11111] via 10.255.255.1, 00:10:05, Tunnel0
O 10.255.4.4/32 [110/22223] via 10.255.255.1, 00:10:05, Tunnel0
O 10.255.1.1/32 [110/11112] via 10.255.255.1, 00:10:05, Tunnel0
R5#sh ip cef 10.255.4.4
10.255.4.4/32, version 49, epoch 0
0 packets, 0 bytes
via 10.255.255.1, Tunnel0, 0 dependencies
next hop 10.255.255.1, Tunnel0
valid adjacency
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
