Are you sure host route for 150.1.7.7 is being sent? With regards Kings
On Tue, Jun 19, 2012 at 8:42 AM, Eugene Pefti <[email protected]>wrote: > Guys,**** > > What’s wrong with my distribute-list that I’m trying to setup on the ASA > to allow only routes 192.10.1.0/24 and 150.1.7.7 to send to R4 ?**** > > ** ** > > The topology is as follows:**** > > ** ** > > BB2---(192.10.1.0)--------SW1 ------------- > (EIGRP)--------ASA--------(EIGRP)---------R4**** > > (loopback-150.1.7.7)**** > > ** ** > > ** ** > > I create an ACL on the ASA to include the above said networks to be > included in EIGRP updates:**** > > ** ** > > *access-list EIGRP-REDIST standard permit host 150.1.7.7* > > *access-list EIGRP-REDIST standard permit 192.10.1.0 255.255.255.0* > > ** ** > > and instruct it to send an update to R4 on its OUT interface**** > > ** ** > > *router eigrp 100* > > * distribute-list EIGRP-REDIST out interface OUT* > > * network 163.1.124.0 255.255.255.0* > > * network 163.1.127.0 255.255.255.0* > > * * > > Then I verify routes on R4 and see that there’s route to 192.10.1.0/24network > but no route to 150.1.7.7 > **** > > Removing the distribute-list restores the route to SW1 loopback on R4.**** > > ** ** > > Eugene**** > > ** ** > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
