Samarth, Yes, I did it!
I've followed the process below of Cisco trustsec page, but instead of using Windows CA option Web Server, I used DigiCert with Apache option. http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_04_ise_bootstrapping.pdf#page=9&zoom=auto,0,772 Atenciosamente, Rodrigo Alves dos Santos .ılı.ılı. Network Consultant - CCIE-R&S #38214 +55 (11) 9 7688-0409 Skype: ralves85 Knowledge is power. Power corrupts. Study hard and be Eeeeviiiil...... 2013/4/18 Samarth Chidanand <[email protected]> > Hope you have also downloaded the CA public cert of digicert first. Then > create the CSR / PubPriv keypair and bind that to the ID cert.**** > > ** ** > > ** ** > > *Samarth Chidanand* > > *Sr Instructor / Developer – IPexpert* > > *CCIE #18535 (R&S, Security)* > > *CCSI #34585* > > ** ** > > ** ** > > ** ** > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Rodrigo Alves > dos Santos > *Sent:* Thursday, April 18, 2013 11:47 PM > *To:* [email protected] > *Subject:* [OSL | CCIE_Security] ISE Public Cert**** > > ** ** > > Hi Guys,**** > > Someone here have already configured public cert to ISE web auth portal? > On WLC I'm redirecting the portal to ISE. I have generated on ISE the CSR > and paid for a cert on http://www.digicert.com (I used "Apache" for > certificate type because I didn't find Web Server like Windows CA) but > after import the cert to ISE I'm still getting the msg that source is not > trust.**** > > I have doubt If I should use a valid cert to WLC that is redirecting de > page and show the IP 1.1.1.1 or to ISE. Anybody can clarify this doubt and > send some usuful doc?**** > > > > > > **** > > Atenciosamente, > > Rodrigo Alves**** > > **** >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
