I've never ran across this, but interesting in fact.
What I remember (from a non-nat situation), and what you didn't put below, is
the class-map. What does your class-map have in it? The service-policy looks
like you are calling an ACL.
What if you were to get less restrictive with your ACL, and remove the
possibility of an ASA 8.4+ NAT issue, and use a different class map? This
would remove the host restriction and just check on the BGP port.
class-map BGP
match port tcp eq bgp
The rest is the same.
Let us hear back.
Regards,
Jay McMickle- 2x CCIE #35355 (R&S,Sec)
________________________________
From: Mike Rojas <[email protected]>
To: Jason Madsen <[email protected]>
Cc: "[email protected]" <[email protected]>
Sent: Wednesday, May 1, 2013 11:05 PM
Subject: Re: [OSL | CCIE_Security] ASA BGP Auth Passing through
That's the issue. I remember i had to put a Nat0 on the old v3 lab.. Ill
configure a manual NAT tomorrow on my lab and test out. Pretty much I think
thats the issue.
Sent from my iPhone
On May 1, 2013, at 9:31 PM, "Jason Madsen" <[email protected]> wrote:
Hi Mike,
>
>
>I don't believe you can use NAT here as the BGP source address is built into
>the MD5 hash.
>
>
>
>
>Jason
>
>
>
>On Wed, May 1, 2013 at 9:07 PM, Mike Rojas <[email protected]> wrote:
>
>Hi,
>>
>>I am having troubles with BGP passing through with authentication. I
>>configured the routers as follow (Since the Initial configs are not ready,
>>but based on the exercise you kind of know where it is going :))
>>
>>R1
>>router bgp 14
>> no synchronization
>> bgp log-neighbor-changes
>> network 11.11.11.0
>> neighbor 200.100.34.254 remote-as 14
>> neighbor 200.100.34.254 password cisco
>> no auto-summary
>>
>>R4
>>router bgp 14
>> no synchronization
>> bgp log-neighbor-changes
>> network 4.4.4.4
>> neighbor 200.100.34.1 remote-as 14
>> neighbor 200.100.34.1 password cisco
>> no auto-summary
>>
>>Now, in order to allow this across the ASA, I configured the following:
>>
>>access-list BGP extended permit tcp any host 192.168.103.1 eq bgp
>>access-list BGP extended permit tcp host 192.168.103.1 any eq bgp
>>
>>tcp-map BGP
>> tcp-options range 19 19 allow
>>
>>policy-map global_policy
>> class BGP
>> set connection random-sequence-number disable
>> set connection advanced-options BGP
>>
>>If I do the show service-policy flow:
>>
>>ASA003(config)# sh service-policy flow tcp host 200.100.34.254 host
>>192.168.103.1 eq 179
>>
>>Global policy:
>> Service-policy: global_policy
>> Class-map: BGP
>> Match: access-list BGP
>> Access rule: permit tcp any host 192.168.103.1 eq bgp
>> Action:
>> Input flow: set connection random-sequence-number disable
>> set connection advanced-options BGP
>> Class-map: class-default
>> Match: any
>> Action:
>> Output flow:
>>Interface outside:
>> Service-policy: outside
>> Class-map: IPS
>> Match: access-list IPS
>> Access rule: permit ip any any
>> Action:
>> Input flow: ips inline fail-open
>> Class-map: class-default
>> Match: any
>> Action:
>>
>>Here is the NAT:
>>
>>NAT from inside:192.168.103.1 to outside:200.100.34.1
>> flags s idle 0:00:23 timeout 0:00:00
>>
>>However, the connection always stays like this:
>>
>>TCP outside 200.100.34.254:52812 inside 192.168.103.1:179, idle 0:00:00,
>>bytes 0, flags SaAB
>>
>>I took captures on the ASA and I am able to see that the Option 19 is passing
>>correctly, but on the Router 1 I only see:
>>*May 2 02:04:16.383: %TCP-6-BADAUTH: Invalid MD5 digest from
>>200.100.34.254(55025) to 192.168.103.1(179)
>>
>>If I remove authentication, the Adjacency comes up instantly. I reloaded the
>>routers just in case. No go.
>>
>>Any help would be appreciated.
>>
>>Mike.
>>
>>
>>_______________________________________________
>>For more information regarding industry leading CCIE Lab training, please
>>visit http://www.ipexpert.com/
>>
>>Are you a CCNP or CCIE and looking for a job? Check out
>>http://www.platinumplacement.com/
>>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
