Hello,
I have a quick question, and I think most of you know it but I am quite new
with Etherchannels and I need guidance on an issue that I am having. On Lab 9
which is the one with BVI Active/Active and BVI interfaces, there is a task
that we need to configure the etherchannel for the Failover link.
I did that however, I confused the term of Active/ with On in the type of mode
which we need to configure on the port channel, so it came up fine, but it was
not using LACP.
Unfortunately, i dont have two switches that I can play with so my two ASAs are
plugged into the same switch. When I changed the mode to Active on the switch
as well on the ASAs, 3 ports were on the port channel, however, the other 3
that belonged to the Secondary Unit stayed on a "suspended" state.
What I did to correct this issue was to create a port-channel 2, and I put the
same config and it was working fine.
I know that If I dont use LACP, the 6 ports can be functional, however, if I
use LACP, 3 ports always stay on Suspended.
Quite sure this is an easy one, just cant find the root cause.
Thanks!
Mike.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
