What command are you specifically looking at? Are you trying to include this
in a route-map, PBR, BGP, etc....?
I verified that IPv6 is supported even with LAN_BASE on the ISR, but please
clarify to the group what context you are trying to accomplish.
Cheers.
Regards,
Jay McMickle- 2x CCIE #35355 (R&S,Sec)
________________________________
From: Joaquim Fernandes <[email protected]>
To: [email protected]
Sent: Thursday, June 13, 2013 1:17 AM
Subject: [OSL | CCIE_Security] IPV6 Secure Neighbor discovery...
HI Team,
I m currently trying to configure IPV6 Next Hop Security Feature /
Neighbor Discovery on my Router.
I have Cisco 2901/11/21 ISR with 15.2.4 M2 Security universal IOS image.
However when i try to configure the IPV6 Next hop security feature,
ISR gives me error "Stating the command is no valid"
I have checked the Software Advisor and i can see my IOS is supported.
Can any one assist me or guide what IOS i need or am i missing
something to enable the IPV6 Next HOP security feature.
Any guidance would be a great help.
Rgds,
Joaquim
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
