Dear all,
I have a question about Dynamic to static IPsec VPN , that a remote PIX
receives an IP address through Dynamic Host Configuration
Protocol (DHCP) and connects to a central PIX. This configuration enables the
central PIX to accept dynamic
IPsec connections. The remote PIX uses network address translation (NAT) to
"join" the privately addressed
devices behind it to the privately addressed network behind the central PIX.
I create a tunnel and every thing is going well . But the problem is that after
a period of time the remote device that receives an IP address through DHCP ,
loses this command :
route outside 0.0.0.0 0.0.0.0 192.168.20.1
So that I lost the connection and I have to add it again in the remote PIX .
This makes a lot of problem for our network.
Please ,I need your advice to solve this problem .
Best Regards,
Israa Nema
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
