Thanks Rick, Suresh Mishra CCIE #21577 (R/S)
On Tue, Oct 27, 2009 at 4:14 AM, Rick Mur <[email protected]> wrote: > Like I said, I can't imagine that Cisco would ask you that. I agree that > our explanation of the question is not the best as it should mention that > every serial interface that participates in the topology (including the > sub-interfaces) has 512Kbps of bandwidth. In the real lab, I would ask the > proctor about this and he would definitely give you clarification on this > (depending on how you ask it of course :-) > > > > > -- > > Regards, > > Rick Mur > CCIE2 #21946 (R&S / Service Provider) > Sr. Support Engineer – IPexpert, Inc. > URL: http://www.IPexpert.com > > > On Mon, Oct 26, 2009 at 11:57 PM, Matt Hill <[email protected]> wrote: > >> Hang on... >> >> So are you saying divide 512k by the number of subifs? Say 512/3 (or >> whatever it is)? >> >> I read the query literally and applied the commands to the serial >> interface (IIRC) when I did this lab. >> >> While we are on the topic, what debug commands can we use? I got no >> output at all from about 5 different ones I tried. debug mpls >> traffic-eng [events|errors] and a few others I dont recall offhand. >> >> Cheers, >> Matt >> >> CCIE #22386 >> CCSI #31207 >> >> 2009/10/27 Rick Mur <[email protected]>: >> > Hi Suresh, >> > I agree with that the explanation should be described a little better. >> Still >> > don't 'over'-think the question. I don't see these type of questions >> asked >> > and that Cisco would want you to divide the total bandwidth over the >> serial >> > interfaces. Just keep in mind that all serial interfaces have a >> bandwidth of >> > 512. Technically sub-interfaces are interfaces as well, so it is covered >> in >> > the question :-) >> > Again don't overthink it, just keep it simple and go for the easiest >> way. >> > People make a lot of mistakes by making their solution to complex. >> > >> > -- >> > >> > Regards, >> > >> > Rick Mur >> > CCIE2 #21946 (R&S / Service Provider) >> > Sr. Support Engineer – IPexpert, Inc. >> > URL: http://www.IPexpert.com >> > On 26 okt 2009, at 21:22, Suresh Mishra wrote: >> > >> > Hi all, >> > This question states that the bandwidth of the serial interfaces is >> 512Kbps. >> > However, the configuration assumes that each sub-interface is 512k while >> > configuring the rsvp bandwidth. >> > I think the question should mention sub-interfaces instead of serial >> > interfaces to make it clear. >> > >> > Thanks >> > Suresh >> > >> > >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
