Hi Experts,
Here is a simple topology;
CE1-----PE1----MPLS n/w----- PE2------CE2
OSPF(area 0) is running between PE and CE. As expected, i could see the
loopback IP (advertise via ospf) of CE1 in CE2 as "IA" summary routes.
When i enabled "*capability vrf-lite" *command on PE2, the same routes are
appeared as "E2" routes in CE2. The cisco CLI document doesnt give much info
about this type conversation. Could you please explain what really going on
after enabling "*capability vrf-lite" *
*
*
*R6 is CE2.*
*
*
*
R6#show ip route ospf
100.0.0.0/32 is subnetted, 1 subnets
O IA 100.100.100.100 [110/3] via 13.1.2.1, 00:01:43, FastEthernet0/0
12.0.0.0/24 is subnetted, 1 subnets
O IA 12.1.1.0 [110/2] via 13.1.2.1, 00:01:43, FastEthernet0/0
13.0.0.0/24 is subnetted, 2 subnets
O 13.1.1.0 [110/2] via 13.1.2.1, 00:01:43, FastEthernet0/0
R6#
R6#
R6#
*Mar 1 02:41:11.043: %OSPF-5-ADJCHG: Process 1, Nbr 13.1.2.1 on
FastEthernet0/0 from LOADING to FULL, Loading Done
R6#
R6#
R6#show ip route ospf
100.0.0.0/32 is subnetted, 1 subnets
O E2 100.100.100.100 [110/2] via 13.1.2.1, 00:01:12, FastEthernet0/0
12.0.0.0/24 is subnetted, 1 subnets
O E2 12.1.1.0 [110/1] via 13.1.2.1, 00:01:12, FastEthernet0/0
13.0.0.0/24 is subnetted, 2 subnets
O 13.1.1.0 [110/2] via 13.1.2.1, 00:01:12, FastEthernet0/0
R6#
*
*
*
Thanks,
Venkat
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
